EMERSONUSER’S MANUAL MANUEL DE L’UTILISATEUR MANUAL DEL USUARIO UW40T SERIES

LED TV.

• Do not place anything on the LED TV that can cause liquid to splash on it 

(e.g. flower vase).

• Do not place heavy objects on the LED TV, audio/video cables, or power 

cord.

ANTENNA INSTALLATION SAFETY

Outdoor Antenna Grounding

If an outside antenna or cable system is connected to the LED TV, be sure the 

antenna or cable system is grounded to prevent voltage surges and built-up static 

charges. Article 810 of the National Electrical Code, ANS/NFPA 70, provides 

information on proper grounding of the mast and supporting structure, grounding of 

the lead-in wire to an antenna discharge unit, connection to grounding electrodes, 

and requirements for the grounding electrode.

CLEANING THE LED TV

To clean the screen:

1 Wipe the screen with a clean, soft, lint-free cloth. This removes dust and other 

particles.

2 If it is still not clean, apply a small amount of non-ammonia, non-alcohol 

based glass cleaner onto a clean, soft, lint-free cloth, and wipe the screen.

To clean the case:

1 Wipe the case with a soft, dry cloth.

2 If it is still not clean, apply a small amount of non-ammonia, non-alcohol 

based, mild non-abrasive detergent onto a clean, soft, lint-free cloth, then 

wipe the surface.

Dolby-Digital Notice

Manufactured under license from Dolby Laboratories. Dolby and the double-D 

symbol are registered trademarks of Dolby Laboratories.

• Make sure the LED TV is turned off and the power cord is 

disconnected from the power outlet.

• Never spray or pour any liquid directly onto the screen or the 

case.

LED TV BASE

INSTALLING THE LED TV BASE

1 Open the LED TV carton box.

2 Remove the LED TV base.

3 Remove the plastic bag.

4 Remove the two top carton stabilizers from the LED TV.

5 Remove the protective plastic covering the LED TV.

6 Grasp the two sides of the LED TV and then pull it out of the carton box.

7 Remove the two bottom carton stabilizers from the LED TV.

8 Lay the LED TV on a clear, flat, and stable surface.

9 Align the base to the bottom side of LED TV and use four M6 x 10 screws to 

secure it.

10 Carefully orient the LED TV in an upright position.

CAUTION:

The LED TV unit may be too heavy for one person to lift. If this is the case, 

make sure to ask for assistance in handling the LED TV to prevent 

physical injury and/or damage to the unit.

TV PROGRAM

Use the TV Program sub-menus to manage the channel list, language sound, and to 

scan for available TV channels in your area.

Press on the remote control or MENU on the control panel to display the setup 

menu screen then select TV Program to display the TV Program sub-menu. The 

following options are available: Skip List, Channel Edit, MTS, Auto Search, and 

Manual Add.

Skip List

Use Skip List to select the channels you want to skip.

Adding Channels to Skip List

1 Use the / keys to select Skip List and press . The Channel Skip 

List screen appears.

2 Use the / keys to select the desired channel.

3 Press repeatedly to check (add to the Skip list) or uncheck (clear to 

the Skip list) the channels.

4 Repeat steps 2 and 3 to add more channels.

5 Press to save and exit the screen.