DCS; Industrial control system
NameDescriptionContent
NEW CENTER
Current Location:

EMERSONUSER’S MANUAL MANUEL DE L’UTILISATEUR MANUAL DEL USUARIO UW40T SERIES

From:EMERSON | Author:LIAO | Time :2025-08-19 | 318 Browse: | Share:

DIGITAL TELEVISION TRANSITION NOTICE

This device contains a digital television tuner, so it should receive digital over the air 

TV programming, with a suitable antenna, after the end of full-power analog TV 

broadcasting in the United States on June 12, 2009. The nationwide switch to digital 

television broadcasting will be complete on June 12, 2009, but your local television 

stations may switch sooner. After the switch, analog-only television sets that receive 

TV programming through an antenna will need a converter box to continue to receive 

over-the-air TV. Watch your local stations to find out when they will turn off their 

analog signal and switch to digital-only broadcasting.

For more information, call the FCC at 1-888-CALL-FCC (1-888-225-5322) or see 

www.DTV.gov. For information on the TV Converter program, and on government 

coupons that may be used toward the purchase of one, see www.dtv2009.gov, or call 

the NTIA at 1-888-DTV-2009.

ENERGY STAR DISCLAIMER

This Westinghouse product has earned the ENERGY STAR® for meeting U.S. 

Federal energy efficiency guidelines as set by the Department of Energy and 

Environmental Protection agency. The ENERGY STAR® program exists to provide 

energy saving guidelines and help promote energy efficient products and practices. 

Changes to certain features, settings and functions of this TV can change and/or 

increase its power consumption. Depending on how settings are changed, power 

consumption may exceed the limits required for ENERGY STAR® qualification. This 

Westinghouse TV will operate at optimal energy efficiency in “Home” mode.

IMPORTANT INFORMATION

Warnings

To reduce the risk of fire or electric shock:

• Do not expose this product to rain or moisture.

• Do not remove the rear cover. There are no user-serviceable parts inside. 

Refer all servicing requirements to qualified service personnel.

• The plug should be connected to a mains socket outlet with a protective 

earthing connection.

The lightning flash with arrowhead inside an equilateral 

triangle symbol is intended to alert the user to the presence 

of uninsulated dangerous voltage within the product's 

enclosure that may be of sufficient magnitude to constitute a 

risk of electric shock.

The exclamation inside an equilateral triangle symbol is intended to 

alert the user to related operating and maintenance instructions in 

the user documentation accompanying the product.

WARNING!

This device must be operated with the original power supply.

WARNING!

To prevent injury, this apparatus must be securely attached to the floor/wall in 

accordance with the installation instructions.

CAUTION:

The power supply outlet should be located near the LED TV and should be easily 

accessible.

Always use the appropriate AC cord that is certified for your specific country. 

Some examples are listed below:

• USA – UL

• Canada – CSA

• Japan – Electric Appliance Control ActIMPORTANT INFORMATION

Warnings

To reduce the risk of fire or electric shock:

• Do not expose this product to rain or moisture.

• Do not remove the rear cover. There are no user-serviceable parts inside. 

Refer all servicing requirements to qualified service personnel.

• The plug should be connected to a mains socket outlet with a protective 

earthing connection.

The lightning flash with arrowhead inside an equilateral 

triangle symbol is intended to alert the user to the presence 

of uninsulated dangerous voltage within the product's 

enclosure that may be of sufficient magnitude to constitute a 

risk of electric shock.

The exclamation inside an equilateral triangle symbol is intended to 

alert the user to related operating and maintenance instructions in 

the user documentation accompanying the product.

WARNING!

This device must be operated with the original power supply.

WARNING!

To prevent injury, this apparatus must be securely attached to the floor/wall in 

accordance with the installation instructions.

CAUTION:

The power supply outlet should be located near the LED TV and should be easily 

accessible.

Always use the appropriate AC cord that is certified for your specific country. 

Some examples are listed below:

• USA – UL

• Canada – CSA

• Japan – Electric Appliance Control Act

NOTICES

Important Notices Concerning Power Cord Selection

The specific power cord for this LED TV is enclosed and has been selected 

according to the country of destination. Use the enclosed power cord to prevent 

electric shock. Observe the following guidelines if it is necessary to replace the 

original cord set, or if there is no cord set enclosed. The female receptacle of the 

cord set must meet IEC-60320 requirements and should look like Figure A1 below:

For the United States and Canada

In the United States and Canada the male plug is a NEMA5-15 style (Figure A2), 

UL-listed, and CSA-labeled. For LED TVs that are to be placed on a desk or table, 

type SVT or SJT cord sets may be used. For LED TVs that are to be placed directly 

on the floor, only SJT type cord sets may be used. The cord set must be selected 

  • ALSTOM AM164 Analog Output / Remote I/O
  • ALSTOM UT150-1 PID temperature controller / process control board
  • ALSTOM AL132 AL132A STO0982E01 Control Motherboard / CPU Card
  • ALSTOM AS111-1 Analog Output (AO) Module
  • ALSTOM AH116-2 Servo Drive / Control Module
  • ALSTOM V4555724-0100 Electromechanical Contactor /Power Switch
  • WATLOW 999D,999A Digital/Analog Dual-Channel Base Unit
  • WATLOW 998D 998A Digital/Analog Dual-Channel Base Unit
  • WATLOW 999D-11FF-AARG Dual-channel digital unit with universal process outputs
  • WATLOW Wattlo 998D-22KK-ARRG is a high-performance dual-channel digital controller.
  • WATLOW 996A Single-loop controller
  • WATLOW 996D-11CC-CUGR Single-loop digital controller
  • WATLOW 996D Single-Channel Digital Temperature/Process Controller
  • WATLOW 997D Digital Dual-Channel Base Unit
  • WATLOW 997A Analog Dual-Channel Variant
  • WATLOW DAC / SDAC,Digital-to-Analog / Serial-to-Analog Modules
  • WATLOW MLS300-OIT Operator Interface Terminal (Keypad/Display),Discontinued
  • WATLOW CIM300 Communication Interface Module (EIA-232/485),Discontinued
  • WATLOW MLS300-CIM Control Interface Module (Comm Bridge),Discontinued
  • WATLOW MLS300-AIM,Analog Input Module (16-channel expansion),Discontinued
  • WATLOW MLS300-PM Processor Module (Central CPU),Discontinued
  • Watlow MLS332 32-Loop Processor Base Unit,Discontinued
  • Watlow MLS316 Multi-loop thermal controller
  • Watlow CLS208 C10000CP high-performance, 8-loop PID temperature controller
  • Watlow CAS 16CLS/CAS Multi-loop temperature controller
  • HIMA K9212 Module Overview
  • ABB CP555 1SBP260179R1001 Product Overview
  • Watlow MLS300 Multi-Loop Control System
  • Watlow 997D-11CC-JURG SERIES 997 Vertical Limit Control
  • Watlow CLS216 | Multi-Loop PID Temperature Controller
  • Watlow NLS300-CIM316 Multi-Loop Control Interface Module
  • Watlow PPC-TB50 (30280-00) Precision Power Controller
  • ABB PPD113-B03-23-111615 high-performance Processor / Controller Module
  • ABB MB510 3BSE002540R1 Control System Accessory
  • ABB 3BSE000863R1 SR511 Power Supply
  • ABB 3BSE014227R1 RF533 Central Unit
  • ABB PDD500A101 high-performance Drive Board / Processor Module
  • ABB PPD512A10-150000 high-performance Controller/Processor Module
  • ABB 500BIO01 1MRB150005R0001 1MRB200060/E Binary Input/Output (Combined)
  • ABB 500BIM01-1MRB160024R0002 Binary (Digital) Input Module
  • ABB 500PSM03 1MRB150038R1 894-030375D 136-011100H Power Supply Module
  • ABB 500PSM02 1MRB150015R1 AD-272.100.20-01 AZ:C Power Supply Module
  • ABB 500AIM02 1MRB150022R001 1HDF 930412 X010 Analog Input Module (AIM)
  • ABB 500MTM02 1MRB150020R0712 1HDF 930512 X010 Multivariable Transmitter Module
  • ABB 500SCM01 1MRB150004R0001 1MRB200059/C Signal Regulation and Monitoring Module
  • ABB 500TRM02 1MRB150011R0001 Terminal/Input-Output Board
  • ABB 500CPU03 1HDF700003R5122 Central Processing Unit module
  • ABB 500PB101 1MRB178009R0001 1MRB200064/C Communication Module
  • ABB 500CSP04 HE401314/0002 1MRB150051R2 Control and System Processing Module
  • ABB 500CMP04 HE401314/0001 1MRB150051R1 Communication motherboard
  • ABB 500TTM02 1MB150021R01161HF930712X010 Temperature / Logic Interface Module
  • ABB DSAO110 57120001-AT/1 Analog Output 4 Channels
  • ABB UNS4684A-P,V.1 HIEE305114R00R0001 Overvoltage protection (OVP) and pulse coupling panel (PCP) module
  • ABB PVD164A2059 3BHE014340R2059 high-performance Excitation Processor Module
  • ABB PFCL201CE 10KN 3BSX105983-100 Pressductor® Curved Plate Force Sensor
  • ABB 500SCM01 1MRB200059/C 1MRB15004R0001 Control Module
  • ABB 500CPU05 1MRB150081R1/E Central Processing Unit module
  • ABB 500CIM05 1MRB150077R1/B Communication Interface Module
  • ABB 500BIO01 1MRB150005R1/J high-performance Binary Input/Output (BIO) module
  • Metso D201379L ACN RT Controller / Processor
  • Metso D201505 (ACN C20 Controller)
  • Metso D201463 high-performance Network Controller / Processor Module
  • Metso D201505R (ACN C20 Series)
  • Metso D201380 CPU / Processor Module
  • Metso D202275 ACN Communication / Gateway Node
  • Metso D201376 ACN RT (Real-Time) Controller Node
  • METSO D200175 Application Control Node (ACN) Proc
  • METSO D200137 high-performance controller module
  • METSO IOP111 Analog Input Module
  • METSO IOP353 Digital Output Module
  • METSO IOP304 high-performance Thermocouple (TC) / Millivolt (mV) Input Module
  • METSO PDP601 high-performance Distributed Processing Unit
  • METSO IOP345 Digital Input/Output Module
  • METSO DPU-MR high-performance Distributed Processing Unit
  • METSO IOP114 high-precision Analog Input Module
  • METSO IOT300A Terminal substrate / Interface module
  • Metso R/I-TB 9139041 nput/output (I/O) interface module
  • YOKOGAWA YS1700-100/A06/A31 Programmable Logic Controller
  • YOKOGAWA PW482-10 AC Input Power Module
  • YOKOGAWA SCP451-11 CPU
  • YOKOGAWA SR1030B62 high-precision Power Supply Unit (PSU)
  • YOKOGAWA AAI143-H50 high-density Analog Input Module
  • YOKOGAWA AMM42 high-density Analog Input/Output Module
  • YOKOGAWA SDV144-S63 Digital input module
  • YOKOGAWA AIP830-111 Operating keyboard
  • YOKOGAWA S9361DH-00 High-performance terminal board module
  • YOKOGAWA ATK4A-00 S1 Terminal block adapter
  • YOKOGAWA PW701 Power Supply Module
  • YOKOGAWA AVR10D-A22010 Bus Converter
  • YOKOGAWA PROFIBUS-DP communication module
  • YOKOGAWA AIP578 AIP591 Optical link transceiver module
  • YOKOGAWA PW501 Power module
  • YOKOGAWA YNT511D ER Bus Terminator
  • YOKOGAWA AIP171 Vnet/IP-V net Coupler Unit
  • YOKOGAWA VI702 high-speed Vnet/IP Interface Module
  • YOKOGAWA Models 4370 µR1800 Recorder
  • YOKOGAWA ANR10D communicates the analog I/O signals and contact I/O
  • YOKOGAWA SDV144-S13 Digital Input Module
  • YOKOGAWA NFAI143-H00 Simulation Input Module
  • YOKOGAWA EB501 ER bus interface slave module
  • YOKOGAWA V0/E1/TCAM/L08 Input/Output Module Card
  • YOKOGAWA VO/E2/TCDM24/L8 Temperature Controller / Data Logger
  • YOKOGAWA 16137-223 16137-222 Communication cable
  • YOKOGAWA 16137-153 Diagnosis and Maintenance Module
  • YOKOGAWA 8596020000 Process control
  • YOKOGAWA TCDM24 8662560000 Terminal Module
  • YOKOGAWA PSCAMAAN Power module
  • YOKOGAWA DR1030B60 Hybrid multi-point recorder
  • YOKOGAWA ADV551 Digital output module
  • YOKOGAWA AAI543 Simulation output module
  • YOKOGAWA LR4220E Desktop recording equipment
  • YOKOGAWA SR1008B62 Industrial-grade miniature recorder
  • YOKOGAWA SC200S Communication interface module
  • YOKOGAWA F3XD64-3N CPU module
  • YOKOGAWA F3WD64-3N Input-output module
  • YOKOGAWA F3SP21-0N, F3SP25-2N F3SP35-5N CPU module
  • YOKOGAWA F3PU10-0N AC power supply module
  • YOKOGAWA F3PU06-0N Core power module
  • YOKOGAWA F3NC01-0N F3NC02-0N Positioning Module with Analog Voltage Output
  • YOKOGAWA F3LC21-1N Multi-link unit
  • Yaskawa USAHEM-02-TE53 Servo motor
  • Yaskawa CACR-SR07BE12M Compact servo amplifier
  • YASKAWA JAMSC-B2732V High-performance analog output module
  • YASKAWA CACR-02-TE1K Servo driver
  • YASKAWA DDSCR-R84H Programmable Logic Controller
  • YASKAWA JANCD-XTU01B Power supply startup circuit board
  • YASKAWA JANCD-XIO01 Input/Output (I/O) Control Board.
  • YASKAWA JACP-317800 Servo amplifier