YOKOGAWA S9361DH-00 High-performance terminal board module
The Yokogawa S9361DH-00 is a high-performance Terminal Board Module primarily used within the CENTUM XL and CENTUM CS legacy Distributed Control Systems (DCS).
It acts as a rugged interface point where field wiring (sensor and actuator signals) is connected before being routed to the internal logic of the DCS via I/O modules.
1. Introduction
The S9361DH-00 is a classic terminal board designed for heavy-duty industrial environments. It provides a organized, secure landing spot for field cables, ensuring that signals from the plant floor are cleanly transitioned into the control system.
Although it is a legacy component, it is widely utilized in existing plants for its durability and the "pluggable" nature of its connections, which simplifies maintenance and module replacement.
2. Technical Parameter Table
| Feature | Specification |
| Model | S9361DH-00 |
| Product Type | Terminal Board / Terminal Block Module |
| Terminal Count | 16-point |
| Voltage Rating | 60 V to 300 V AC/DC |
| Current Rating | Up to 10 A |
| Isolation Voltage | 500 V to 1000 V AC |
| Wire Size Compatibility | 0.2 to 2.5 $mm^2$ (approx. 24 to 12 AWG) |
| Contact Resistance | $le 20 mOmega$ |
| Operating Temp | -40°C to +85°C |
| Weight | Approx. 0.24 kg |
| Dimensions | 17.8 (W) x 4.6 (H) x 24.9 (D) cm |
3. Product Advantages and Features
High Reliability: Built with tin-plated copper alloy or phosphor bronze contacts to ensure long-term signal integrity without oxidation.
Compact Design: Optimized dimensions allow for high-density mounting within standard 19-inch racks or specialized DCS cabinets.
Rugged Environmental Specs: With an operating range down to -40°C, it is suitable for unheated field enclosures in harsh climates.
Clear Identification: Features distinct markings and labeling areas for each terminal point, reducing the risk of wiring errors during installation or troubleshooting.
Secure Connections: Uses high-torque screw terminals (M3 or M3.5 style) to prevent wires from loosening due to vibration.
4. Application Cases
Legacy System Support: Maintaining and expanding existing CENTUM XL or CENTUM CS installations in refineries and power plants.
Discrete Signal Landing: Used for terminating 24V DC or 110V AC digital signals from field switches and relays.
Interposing Terminal Point: Serving as a bridge between high-voltage field equipment and low-voltage digital I/O modules.
Cabinet Retrofitting: Often used in refurbishing older control panels where standard Yokogawa footprint compatibility is required.
| BENTLY | 132417-01 |
| Bently | 125840-01 |
| BENTLY | 330100-90-00 |
| BENTLY | 330100-90-01 |
| BENTLY | ASSY78462-01U |
| BENTLY | 1900/27 |
| BENTLY | 135489-01 |
| BENTLY | 1900/55 |
| BENTLY | 125800-01 |
| BENTLY | 135613-02 |
| BENTLY | 135473-01 |
| BENTLY | 136188-01 |
| BENTLY | 125760-01 |
| BENTLY | 125768-01 |
5. Related Models & Same Series
The S9361DH-00 is part of a broad range of termination boards tailored to different signal types (Analog vs. Digital).
Other Models in the Same Series
S9260DE-01: A related terminal board module used for different I/O densities.
S9185FA: Often used for specialized analog signal termination.
S9361DH-S1: The version featuring G3 conformal coating for protection against corrosive gases.
Related System Components
KS1 / KS2 Cables: The multi-core cables that connect this terminal board to the actual I/O modules.
AEA4D / AEP7D: Terminal boards used in newer CENTUM VP systems (the modern successors to the S9xxx series).
| User name | Member Level | Quantity | Specification | Purchase Date |
|---|
-
Watlow SERIES CLS200 SPECIFICATION SHEET -
Detailed Explanation of B&R Power Panel 300/400: The Core of Industrial Automation Control -
YOKOGAWA Models ANB10S, ANB10D, ANR10S, ANR10D Node Units (for FIO) -
Woodward ESDR 4 Current Differential Protection Relay -
Woodward easYgen-3000 Genset Control for -
Woodward CPC-II Current-to-Pressure Converter -
Woodward 8290-189-EPG-installation-manual 8290-044 -
Woodward Product Change Notification 06946A -
Woodward Product Change Notification 06912 -
Fisher™ 4660 High-Low Pressure Pilot -
Flexible digital protection and control equipment SYMAP® -
Woodward 723PLUS Digital Control -
Woodward 505 Digital Controller For steam turbineses -
Woodward 85018V2 505E Digital Governor for Extraction Steam Turbines -
Woodward 85018V1 Turbine Control Parameters
-
Woodward 26871 505 Enhanced Digital Control for Steam Turbines
-
Woodward 03365 505E (Extraction / Admission) -
KONGSBERG RMP420-Remote Multipurpose Input/Output -
KONGSBERG RCU501 Remote Controller Unit -
KONGSBERG RCU500 Remote Controller Unit -
K-Gauge TOP KONGSBERG Tank Overfill Protection SystemFeatures -
Kongsberg DPS112 DGNSS (DGPS/DGLONASS) sensor -
Kongsberg d0000930-presafe-atex-report signed -
HIMax TECHNICAL FACTS X Series -
GE Multilin F650 -
GE MIF II - Legacy -
GE PQM II Power QualIty Meter -
Hydran 201Ti Mark IV Essential DGA monitoring for transformers -
alstom AMS42/84 5B Amplifier SystemAmplifier Technology at its Best. -
GE VMIVME-5576 Fiber-Optic Reflective Memory with Interrupts -
GE Multilin 750/760 - Legacy Feeder Protection System -
GE Fanuc Automation VMICPCI-7806 Specifications -
VMIVME-7807 VME-7807RC* Intel® Pentium® M-Based VME SBC -
GE Fanuc Automation VMIVME-7750 Specifications -
FOXBORO Compact FBM240. Redundant with Readback, Discrete -
FOXBORO FBM208/b, Redundant with Readback, 0 to 20 mA I/O Module -
FOXBORO FBM201e Analog Input (0 to 20 mA) Interface Modules -
Foxboro DCS FBM206 Pulse Input Module -
FOXBORO FBM216 HART® Communication Redundant Input Interface Module -
FOXBORO Z-Module Control Processor 270 (ZCP270) -
FOXBORO Fieldbus Communications Module, FCM10Ef -
FOXBORO Fieldbus Communications Module, FCM10E -
Foxboro DCS Compact FBM241/c/d, Redundant, Discrete I/O Modules -
Foxboro FBM223 PROFIBUS-DP™ Communication Interface Module
-
Foxboro DCS FBM204. 0 to 20 mAI/OModule -
Foxboro FBM239, Discrete 16DI/16DO Module
-
Foxboro FBM202 Thermocouple/mV Input Module
-
Foxboro E69F Current-to-Pneumatic Signal Converter -
EMERSON M-series Intrinsically Safe I/O -
MVME6100 Series VMEbus Single-Board Computer -
Configuration for AMS 6500 Protection Monitors -
Ovation™ Controller Model OCR1100 (5X00481G04/5X00226G04) -
ABB UCU-22, UCU-23 andUCU-24control units -
ABB force measurement -
AEROTECH Ndrive MP Hardware Manual -
AEROTECH Ndrive HPe 10/20/30 -
AEROTECH Ndrive CP Hardware Manual -
AEROTECH Ndrive Linear Series Digital Servo Amplifiers – Linear -
AEROTECH Ndrive HP 10/20/30 P/N: EDU170 -
AEROTECH EDU176_Ndrive_HL -
ADVANCEDMOTION CONTROLS Analog Servo Drive 120A10 -
GE JPAX-H -
GE JPAX family -
GE Industry Leading Experience -
GE Ether-1000 Unit -
GE Cyber Secured Service Unit -
GE Lentronics E1MXe Multiplexer -
GE TTMX Teleprotection Terminal -
GE Lentronics T1 Multiplexer -
GE Lentronics JungleMUX SONET Multiplexer -
GE Lentronics E1MX Multiplexer -
GE Lentronics TN1Ue SDH Multiplexer
-
GE Lentronics TN1U SDH Multiplexer -
GE Gridcom DXC Family Access and Transmission Multiplexer -
GE Advanced Network Management Simplifying Optical Networks -
GE Lentronics VistaNET Network Management System (NMS) -
ABB System Controller Connect -
Ethernet Module EI 803F ABB -
Ethernet Modules EI 802F ABB -
ABB Ethernet Modules EI 801F
-
ABB Power Supply SD 802F / SD 812F -
ABB Power Supply SA 801F / SA 811F -
ABB Basic Unit PM 802F /PM 803F -
ABB AC 800F Controller Redundancy -
ABB Freelance800F AC800F Data Sheet -
ABB Compact control system replaces PLCs using AC 700F -
ABB Triguard SC300E MSR04XI -
ABB Control product - Soft starter PST/PSTB (Intelligent Type) -
ABB Automation System ABB Procontic T200 -
ABB PCS6000 medium voltage wind turbine converter -
SYSTEM DRIVES PCS6000 ABB -
ABB PP886 Compact Product Suite hardware selector -
ABB CP450 Installation and Operation Manual -
ABB ompact 800 5.1 Product Catalog -
ABB Panel 800 version 6 -
ABB Panel 800 Version 6- Panel Builder Version 6.0-1 -
ABB Panel 800 Version 6- PP885 -
ABB IndustrialIT Panel 800 - PP846 Version 5.1 -
ABB IndustrialIT Panel 800 - PP836 Version 5.1 -
ABB Control Panels CP405 Control Panels CP408 -
ABB PowerUP for medium voltage drives -
ABB Advant® Master S100 I/O system -
GE MiCOM P40U Connect MiCOM P40 IEDs to PCs with USB ports -
GE Reason RT431 GPS Precision-Time Clock -
GE Reason RT430 GNSS Precision-Time Clocks -
GE Reason H49 PRP/HSR Redbox Switch -
GE Reason S20 Managed Ethernet Switches -
GE Gridcom DIP.net -
Central Control Station at Jaenschwalde mineLausitzer Braunkohle AG, Germany (2000 -
ABB Ability™ System 800xA Advant® Master S400 I/O to S800 I/O Evolution -
Advant™Automation with MOD 300™ Software -
ABB MEASUREMENT & ANALYTICS EasyLine EL3000 / EL3060 -
ABB MEASUREMENT & ANALYTICS PGC5000 Process gas chromatograph -
ABB AC servo motors BSM Series -
ABB New BSD Series A complete range -
ABB Advant Controller 110 -
ABB ASTAT® Crane motion controller Version AST10_054 -
ABB-Crane Control System - ASTAT
-
ABB Open Control System Advant Controller 210 -
ABB Open Control System Advant Controller 250 -
ABB Advant Controller 160 -
ABB DSCA33 High Performance Signal Conditioners -
ABB Advant Controller 70 – Kompakter und leistungsfähiger -
ABB Advant Controller 31 Hardware 90 Series -
ABB Advant Controller 31 Series 40 and 50 -
ABB Procontic CS 31 Intelligent decentralized automation system -
ABB Digital output module ICSO 08 R1, 8 relay outputs 2 A -
ABB Analog Input/Output Module 07 AC 91
