Configuration for AMS 6500 Protection Monitors

Configuration for AMS 6500

Protection Monitors

Pre-configured user-selectable measurement

types simplify software configuration

Password protected with 4 user login levels

for customized access

Context-sensitive help messages address

setup questions quickly

Includes trend, time function, order

analysis and startup/coast down data

for comprehensive setup.

Configuration includes setup for

basic prediction capabilities, including

troubleshooting and diagnostics

Application

The AMS 6500 configuration software for machinery protection

allows you to configure protection modules, view real-time

vibration monitor system and sensor health.

The intuitive configuration process starts by selecting a card

type. Next, the configuration software presents a simple tabular

view with all configuration settings visible. Tabs help you sort

information between inputs, outputs, advanced machine

diagnostics and administrative tasks. Permissible ranges are

visible for every required entry to help you understand the

bounds of parameters. Preset parameters are automatically

loaded when Emerson sensors and convertors are used.

Real-time data can be displayed during system configuration

to verify that wiring, card settings, and instrumentation are

healthy and configured properly. Real-time information such

as gap voltages, waveform data, and overall vibration data

are viewable.

On-going maintenance functions, such as resetting latching

relays or loading a saved configuration, can be easily performed

from the software. The software can run on PCs or laptops.

Main Configuration Window

With the system configuration software, the following monitors

of the A6000 family can be configured:

A6110. A6120. A6125. A6140. A6150. A6151. A6210. A6220.

A6310. A6312. A6312-8. A6410. A6620. A6630. A6740.

A6740-10. A6824. A6824R

Basic Prediction Capabilities

The AMS 6500 configuration software has built-in capabilities

for some trends that allow basic troubleshooting and prediction

of the machinery. The main value trend shows a graphical

representation along with card health and alarm values. The

software displays the time function of the vibration signal, the

FFT analysis date with up to 400 lines resolution and the FFT

phase data. The software also displays the last startup or coast

down of the machine. The configuration software visualizes the

data and shows speed over time and vibration over speed for

each channel

Configuration for AMS 6500

Protection Monitors

Configuration Software

The configuration kit contains the following parts:

CD-ROM with AMS 6500 protection module configuration

Installation instructions

Configuration cable, 2m, with a 9-pole sub-D plug and a

6-pole mini DIN diode plug for connecting to AMS 6500

protection monitors

DV-adapter 9-pole SUB D on 25-pole SUB D type AB914F

Two adapter cables with SMB-coax plugs on both sides for the

connection of an oscilloscope to the AMS 6500 protection

monitors, length 3m, 296-201-794 by Radiall

Two adapters BNC/SMB R191 209 by Radiall

USB to RS232 adapter

Configuration Programs

The configuration package contains the following programs:

A6910 Configuration software for AMS 6500

protection monitors

Trend view

System Requirements

To load the programs, a PC or laptop must meet the following

minimal prerequisites:

Standard PC/Laptop with Pentium II or better, minimum

clock frequency 500 MHz, CD-ROM, RS232 interface port

(or USB when used with external USB to RS232 convertor)

Operating system: Windows 2000. Windows XP, Windows

Vista or Windows 7

Order Number:

A6910-KIT: Includes software CD, cables, and adapters

A6910: Includes software CD only