DCS Industrial control system
NameDescriptionContent
NEW CENTER
Current Location:

EMERSONUSER’S MANUAL MANUEL DE L’UTILISATEUR MANUAL DEL USUARIO UW40T SERIES

From:EMERSON | Author:LIAO | Time :2025-08-19 | 644 Browse: | 🔊 Click to read aloud ❚❚ | Share:

DIGITAL TELEVISION TRANSITION NOTICE

This device contains a digital television tuner, so it should receive digital over the air 

TV programming, with a suitable antenna, after the end of full-power analog TV 

broadcasting in the United States on June 12, 2009. The nationwide switch to digital 

television broadcasting will be complete on June 12, 2009, but your local television 

stations may switch sooner. After the switch, analog-only television sets that receive 

TV programming through an antenna will need a converter box to continue to receive 

over-the-air TV. Watch your local stations to find out when they will turn off their 

analog signal and switch to digital-only broadcasting.

For more information, call the FCC at 1-888-CALL-FCC (1-888-225-5322) or see 

www.DTV.gov. For information on the TV Converter program, and on government 

coupons that may be used toward the purchase of one, see www.dtv2009.gov, or call 

the NTIA at 1-888-DTV-2009.

ENERGY STAR DISCLAIMER

This Westinghouse product has earned the ENERGY STAR® for meeting U.S. 

Federal energy efficiency guidelines as set by the Department of Energy and 

Environmental Protection agency. The ENERGY STAR® program exists to provide 

energy saving guidelines and help promote energy efficient products and practices. 

Changes to certain features, settings and functions of this TV can change and/or 

increase its power consumption. Depending on how settings are changed, power 

consumption may exceed the limits required for ENERGY STAR® qualification. This 

Westinghouse TV will operate at optimal energy efficiency in “Home” mode.

IMPORTANT INFORMATION

Warnings

To reduce the risk of fire or electric shock:

• Do not expose this product to rain or moisture.

• Do not remove the rear cover. There are no user-serviceable parts inside. 

Refer all servicing requirements to qualified service personnel.

• The plug should be connected to a mains socket outlet with a protective 

earthing connection.

The lightning flash with arrowhead inside an equilateral 

triangle symbol is intended to alert the user to the presence 

of uninsulated dangerous voltage within the product's 

enclosure that may be of sufficient magnitude to constitute a 

risk of electric shock.

The exclamation inside an equilateral triangle symbol is intended to 

alert the user to related operating and maintenance instructions in 

the user documentation accompanying the product.

WARNING!

This device must be operated with the original power supply.

WARNING!

To prevent injury, this apparatus must be securely attached to the floor/wall in 

accordance with the installation instructions.

CAUTION:

The power supply outlet should be located near the LED TV and should be easily 

accessible.

Always use the appropriate AC cord that is certified for your specific country. 

Some examples are listed below:

• USA – UL

• Canada – CSA

• Japan – Electric Appliance Control ActIMPORTANT INFORMATION

Warnings

To reduce the risk of fire or electric shock:

• Do not expose this product to rain or moisture.

• Do not remove the rear cover. There are no user-serviceable parts inside. 

Refer all servicing requirements to qualified service personnel.

• The plug should be connected to a mains socket outlet with a protective 

earthing connection.

The lightning flash with arrowhead inside an equilateral 

triangle symbol is intended to alert the user to the presence 

of uninsulated dangerous voltage within the product's 

enclosure that may be of sufficient magnitude to constitute a 

risk of electric shock.

The exclamation inside an equilateral triangle symbol is intended to 

alert the user to related operating and maintenance instructions in 

the user documentation accompanying the product.

WARNING!

This device must be operated with the original power supply.

WARNING!

To prevent injury, this apparatus must be securely attached to the floor/wall in 

accordance with the installation instructions.

CAUTION:

The power supply outlet should be located near the LED TV and should be easily 

accessible.

Always use the appropriate AC cord that is certified for your specific country. 

Some examples are listed below:

• USA – UL

• Canada – CSA

• Japan – Electric Appliance Control Act

NOTICES

Important Notices Concerning Power Cord Selection

The specific power cord for this LED TV is enclosed and has been selected 

according to the country of destination. Use the enclosed power cord to prevent 

electric shock. Observe the following guidelines if it is necessary to replace the 

original cord set, or if there is no cord set enclosed. The female receptacle of the 

cord set must meet IEC-60320 requirements and should look like Figure A1 below:

For the United States and Canada

In the United States and Canada the male plug is a NEMA5-15 style (Figure A2), 

UL-listed, and CSA-labeled. For LED TVs that are to be placed on a desk or table, 

type SVT or SJT cord sets may be used. For LED TVs that are to be placed directly 

on the floor, only SJT type cord sets may be used. The cord set must be selected 

  • SEL SEL-TWFL Dual Traveling-Wave Fault Locator and 12-Channel MHz Recorder
  • SEL SEL-5035 acSELerator Diagram Builder Software
  • SEL SEL-5033 acSELerator RTAC Software
  • SEL SEL-2411P Pump Automation Controller
  • SEL SEL-2411 Programmable Automation Controller
  • SEL SEL-3560 Real-Time Automation Controller (RTAC)
  • SEL SEL-3555 Real-Time Automation Controller (RTAC)
  • SEL SEL-3350 Computing Platform
  • SEL SEL-3530-4 Real-Time Automation Controller (RTAC)
  • SEL SEL-3505/3505-3 Real-Time Automation Controller (RTAC)
  • SEL Real-Time Automation Controller (RTAC)
  • SEL SEL-2414 Transformer Automation Controller (TAC)
  • SEL SEL-734B Advanced Monitoring and Control System
  • SEL SEL-734W and LINAM WCS
  • SEL SEL-2431 Voltage Regulator Control
  • SEL SEL-5601-2 Synchrowave Event Software
  • SEL SEL-5032 acSELerator Architect Software
  • SEL SEL-5030 acSELerator QuickSet Software
  • SEL SEL-751A Feeder Protection Relay
  • SEL SEL-2440 DPAC Discrete Programmable Automation Controller
  • SEL SEL-2240 Axion
  • SEL SEL-401 Protection, Automation, and Control Merging Unit
  • SEL SEL-TMU TiDL Merging Unit
  • SEL SEL-700BT Motor Bus Transfer Relay
  • SEL SEL-849 Motor Management Relay
  • SEL SEL-3790 Low-Voltage Divider Module
  • SEL SEL-710-5 Motor Protection Relay
  • SEL SEL-487V Capacitor Bank Protection, Automation, and Control System
  • SEL SEL-351RS Kestrel Single-Phase Recloser Control
  • SEL SEL-651RA Recloser Control
  • SEL SEL-651R Advanced Recloser Control
  • SEL SEL-551C Overcurrent/Reclosing Relay
  • SEL SEL-351S Protection System
  • SEL SEL-851 Feeder Protection Relay
  • SEL SEL-451 Protection, Automation, and Bay Control System
  • SEL SEL-751 Feeder Protection Relay
  • SEL SEL-311C Transmission Protection System
  • SEL SEL-387L Line Current Differential Relay
  • SEL SEL-311L Line Current Differential Protection and Automation System
  • SEL SEL-787L Line Current Differential Relay
  • SEL SEL-421 Protection, Automation, and Control System
  • SEL SEL-9L Line Relay
  • SEL SEL-411L Advanced Line Differential Protection, Automation, and Control System
  • SEL SEL-587Z High-Impedance Differential Relay
  • SEL SEL-7251 Electromechanical Direct-Replacement Assemblies
  • SEL SEL-787Z High-Impedance Differential Relay and SEL-HZM High-Impedance Module
  • SEL SEL-487B Bus Differential and Breaker Failure Relay
  • SEL SEL-387 Current Differential and Overcurrent Relay
  • SEL SEL-387A Current Differential and Overcurrent Relay
  • SEL SEL-2600 RTD Module
  • SEL SEL-387E Current Differential and Voltage Relay
  • SEL SEL-787-2/-3/-4 Transformer Protection Relay
  • SEL SEL-487E Transformer Protection Relay
  • SEL SEL-2664S Stator Ground Protection Relay
  • SEL SEL-300G Generator Relay
  • SEL SEL-700G Generator Protection Relay
  • SEL SEL-700G Generator Protection Relay
  • SEL SEL-400G Advanced Generator Protection System
  • SEL SEL-T400L Time-Domain Line Protection
  • SEL SEL-T401L Ultra-High-Speed Line Relay
  • ADLINK Multi-Function DAQ PCI-9222/9223
  • ADLINK PICMG Single Board Computers NuPRO-A40H
  • ADLINK HSL-4XMO HSL-4XMO-TB-D103 HSL-4XMO-CD-N-006
  • ADLINK industrial computer motherboard NuPRO-965DV
  • AADLINK PCI-7442 switch card Digital I/O
  • ADLINK PCI-7260 Digital I/O
  • ADLINK PICMG Single Board Computers NuPRO-852
  • ADlink 6U CompactPCI 2.0 Blades cPCI-6840
  • Adlink  PICMG Single Board Computers  NuPRO-935A
  • ADLINK ADLINK NuPRO-841 REV:1.0 PICMG Single Board Computers
  • ADLINK PCI-8254 / PCI-8258 DSP-based 4/8-axis Advanced Motion Controllers
  • ADLINK NUPRO-780 PICMG Single Board Computers
  • ADLINK USB-7230/7250 Isolated USB Digital I/O Modules
  • Adlink Technology 51-37111-0C1 cPCI-R8217 cPCI-R3700A PCB Interface Card
  • ADLINK DPAC-3020-11(G) Embedded PC Automation Controller
  • ADLINK NuPRO-840 PICMG 1.0 industrial Single Board
  • Adlink 6U CompactPCI 2.0 Blades cPCI-6965
  • ADLINK PCI-9114DG Multi-Function DAQ Card
  • Adlink NuPRO-E43 PICMG Single Board Computers
  • Adlink PCI-7856 Distributed Motion Control
  • ADLINK Mini-ITX Embedded Boards MI-965
  • ADLINK NuPRO-E340 industrial control motherboard
  • ADLINK NuPRO-595 Series Full-Size PICMG 1.0 SBC
  • ADLINK PCIe-GIE64+ / PCIe-GIE62+ 4 / 2-CH PCI Express® Power over Ethernet Frame Grabbers
  • ADLINK CPCI-6910AM-M1G 6U Dual Core Xeon CompactPCI Universal SBC
  • ADLINK/AMPRO CM-435-v2/CM-435 Extreme Rugged™ PC/104 Single Board Computer
  • ADLINK Technology 51-37111-0C1 PCB Interface Card
  • Adlink Centralized Motion Controllers PCI-8164
  • ADLINK PCI-7230/33/34 32-CH Isolated DIO PCI Cardsrd
  • ADLINK NUPRO-E320DV/NUPRO-E320 industrial control motherboard
  • Adlink PCI-8154 Advanced 4-axis Servo & Stepper Motion Controller
  • Adlink cPCI-3534/3538-S Series 4/8-port Asynchronous Serial Communications Modules
  • ADLINK Adlink Digital I/O PCI-7396
  • ADLINK 6U Rear Transition Modules cPCI-R6700 Series
  • ADLINK cPCI-6700B Industrial Control Board
  • ADLINK NuPRO-965/ NuPRO-965LV PICMG Single Board Computers
  • ADLINK HSL-DI16DO16-M-NN 16-CH Discrete Input 16-CH Discrete Output Module
  • Adlink cPCI-6770 6U CompactPCI 2.0 Blades
  • ADLINK NuPRO-598 REV A1 INDUSTRIAL CONTROL MOTHERBOARD
  • ADLINK PCI-7200 PCI Motion Control Card Acquisition Card 51-12001-0C20
  • ADLINK TECHNOLOGY EOS-1200/M4G/SSD32G(G) Industrial Systems
  • ADLINK Centralized Motion Controllers PCI-8134
  • ADLINK cPCI-HR6847E/M2G-1 COMPACT PCI BOARD
  • ADLINK PXIE-8638 BUS EXPANSION MODULE
  • ADLINK cPCI-6910 6U CompactPCI 2.0 Blades
  • Adlink NuPRO-E42 51-41808-0A30 Industrial Motherboard
  • ADLINK IH61-AA400-A4A1E (IMB-M40H) Industrial Motherboard
  • ADLINK PCIe-GIE64+ GigE Vision Frame Grabber Card
  • ADLINK MXC-6322D(G) Industrial Fanless Computer working
  • ADLINK CPCI-7300 32-CH 80 MB/s High-Speed Digital I/O Module
  • Adlink cPCI-8168 Advanced 6U Compact PCI 8-Axis Motion Controller
  • Adlink VME CPU Board cPCI-6626/2710/M4G
  • ADLINK  cPCI-R6200 high-performance 6U CompactPCI Rear Transition Module (RTM)
  • Adlink cPCI-7248 48-CH Opto-22 Compatible Digital I/O Module
  • ADLINK DLAP-211-JNX/DLAP-211-JT2/ DLAP-211-Nan
  • ADLINK cPCI-3544 4-Port RS-422/485 Isolated Serial Communications Card
  • Hirschmann MSP30-16040SCZ999HHE2A Manage the basic unit of the industrial DIN-Rail switch
  • Hirschmann MSP30-16040SCY999HHE2A
  • Hirschmann RS20-0400S2S2SDAEHC09.0.00 Management-type industrial fast Ethernet switch
  • Hirschmann Belden OCTOPUS OS20-002800T5T5T5-TBBY999GMSE3S Manageable industrial Ethernet switch
  • HIRSCHMANN OS20-000800T5T5T5-TBBU999H5SE2S
  • HIRSCHMANN RS20-0800M4M4SDAEHC09.0.14 industrial switch
  • Hirschmann RS20-0800T1T1SDAUHC RS20-0800T1T1SDAE
  • Hirschmann MSM20-M2M2M2M2SY9HH9E99.9 Fast Ethernet Media Module
  • HIRSCHMANN RS30-1602T1T1SDAEHC09.0.10 industrial switch
  • HIRSCHMANN MAR1040-4C4C4C4C9999SMMHPHH Managed Etherne
  • HIRSCHMANN MAR1040-4C4C4C4C9999SM9HRHH  Managed Etherne
  • HIRSCHMANN MAR1040-4C4C4C4C9999SM9HPHH05.1.00 industrial switch