B&R 2CP100.60-1 CPU MODULE

B&R 2CP100.60-1  CPU MODULE

Material number:

2CP100.60-1

Description:

2010 CPU 128 + 256 KB SRAM 1 RS232 interface 1 electrically isolated RS232/TTY 1 electrically isolated RS485/RS422 RS485/RS422:

 network-capable Order application memory separately!

Optional Accessories

Batteries

0AC201.91    Lithium batteries 4 pcs., 3 V / 950 mAh button cell

Infrastructure components

0AC912.9    Bus adapter, CAN, 1 CAN interface

0AC913.92    Bus adapter, CAN, 2 CAN interfaces, including 30 cm attachment cable (DSUB)

0AC916.9    Bus termination, RS485. active for PROFIBUS networks, remote I/O standard top-hat rail mounting supply voltage: 120 / 230 VAC

0G1000.00-090    Bus connector, RS485. for PROFIBUS networks

7AC911.9    Bus connector, CAN

Undefined

2ME910.90-1    2010 application memory 64 KB SRAM, 256 KB FlashPROM With PCC operating system

2ME913.90-1    2010 application memory 512 KB SRAM, 1 MB FlashPROM With PCC operating system

2ME915.90-1    2010 application memory 2 MB SRAM, 2 MB FlashPROM With PCC operating system

The B&R 2000 controller generation is an automation system that provides new levels of

performance, functionality and operational safety. The B&R2003. B&R2005 and B&R2010

systems cover the entire application range, from simple logic controllers to complex

decentralized automation systems.

The systems have different structures, expandability, modularity and CPU performance. These

systems are very closely related and therefore meet the fundamental requirements for complete

centralized and decentralized compatibility for the programmer.

4.1.1  Hardware

• Hardware modularity

• Network-capable

• Communication interfaces to HMI

• PLC and industrial computer functionality

• EMC according to EN61131-2

• Secure I/O bus protocol

• Remote I/O points

• Combined I/O and system bus

• Bit or word processing in a single cycle

• Enhanced performance through multiple I/O bus systems

4.1.2  Software

• Multitasking operating system for PLC and industrial computer applications

• Powerful PLC programming languages

• High-level language programming

• Exact control over PLC timing

• Simple programming software with Windows user interface

• Project management on the programming device

4.2  PLC (Programmable Logic Controller)

The PLC kernel consists of powerful standard computer components. The processors are

supported by RISC processors which enable communication tasks to be carried out

simultaneously allowing faster processing of I/O signals.

Most CPUs use a modular interface concept. Various bus or network systems can be efficiently

integrated in the B&R SYSTEM 2005 using plug-in interface modules.

The computer kernel uses components which build the functionality of an industrial PLC. Bit, byte

and word access is possible in a single cycle which increases speed when mixing PLC links and

industrial computer functionality.

The B&R SYSTEM 2005 has a combined system and I/O bus. On this bus, modules are

operated which are needed for both industrial computer functionality and connecting the

interface to the machine or device. System modules are e.g. additional processor modules,

remote master, network modules etc. Naturally, the bus is multiprocessor-capable.