HIRSCHMANN MM3-4FXM2 MICE Media Module

HIRSCHMANN MM3-4FXM2 MICE Media Module

Description and Operating Instructions

Modular Industrial Communication

Equipment

The Modular Industrial Communication Equip

ment, MICE, is a modular network component.

It was developed particularly for use in an indu

strial environment.

The media modules described in this instruc

tions are the interface of the device to the LAN

and can be plugged onto the following basic

modules of the MICE switch:– MS2108-2 (MICE 2000)– MS3124-4 (MICE 3000)– MS20-… and MS30-…

The MB20 expansion module allows you to

add 2 slots to the MS20-1600. MS30-1602.

MS3124-4 MICE switch basic module for

installing media modules.

The media modules are exclusively intended

for use with Hirschmann MS... modular swit

ches.

MICE allows you to construct switched Indu

strial ETHERNET networks that conform to the

IEEE 802.3 standard.

SWITCH bASIC MODULES

The documentation enclosed to the switch

basic module gives you a detailed description

of the switch basic modules:– “User Manual Installation

Industrial ETHERNET Switch MICE

MS20/MS30” for MS20-… and MS30-…– “User Manual Installation

Industrial ETHERNET Switch Power MICE”– “Description and Operating Instructions Indu

strial ETHERNET Modular Industrial Commu

nication Equipment MICE/Power MICE” for– MS2108-2 (MICE 2000)– MS3124-4 (MICE 3000)

1.2 MEDIA MODULES– MICE 2000: See Table 1.– MICE 3000: See Table 2.– MICE 4000: See Table 3.– MICE media modules open variant:

See Table 4.

1.3 Mb20 (OLD DESIGNATION: Mb-2T)

EXPANSION MODULE

The MB20 expansion module allows you to add

2 slots to the MS20-1600. MS30-1602.

MS3124-4 MICE switch basic module for instal

ling media modules.

1.4 SFP MODULES

SFP modules are optical transceivers

(Fast ETHERNET and Gigabit ETHERNET

SFP modules see chapter 7 Technical Data).

The SFP modules are plugged into the SFP

slots of the Fast ETHERNET media module

MM3-4SFP (MM20-Z6Z6Z6Z6) or of the

Gigabit ETHERNET media modules

MM4-4TX/SFP / MM4-2TX/SFP to provide a

F/O port.

The MM3-4SFP (MM20-Z6Z6Z6Z6) has four

slots for SFP modules (100 Mbit/s).

The MM4-4TX/SFP / MM4-2TX/SFP has

four/two TP interfaces and four/two slots for

SFP modules (1000 Mbit/s). Inserting the SFP

module deactivates the corresponding TP inter

face.

1.5 MM22-T1T1T1T1

POE MEDIA MODULE

The MM22-T1T1T1T1 PoE media module

(deeper module style) supports Power over

ETHERNET (PoE) in compliance with IEEE

802.3af. It enables the connection and the

remote supply of e. g. IP telephones (voice

over IP), webcams, sensors, print servers and

WLAN access points via 10BASE-T/100BASE

TX. With PoE, the power supply of these data

terminal equipments is served via the twisted

pair cable.

The MM22-T1T1T1T1 media module offers

four 10BASE-T/100BASE-TX ports (RJ45

connectors) for connecting network segments

or PoE data terminal equipments (PD, Powered

Device) up to class 0 (respectively class 3)

maximum.

The current is supplied on the idle wire pairs

(spare pairs); the ports are not electrically isola

ted against each other.

In compliance with IEEE 802.3af, each port has

the attributes:– Endpoint PSE– Alternative B.

KOLLMORGEN AKM21C-CKB2AA-00 / AKM21CCKB2AA00 Servomotor

Kollmorgen MMC-SD-1.3-460-D Smart Drive

Kollmorgen MPK411 controller

Kollmorgen S700 Servo Controller S70602-NANANA-NA

KOLLMORGEN SERVOSTAR 603-AS SERVO AMPLIFIER_SERVOSTAR603AS_S60301

Kollmorgen S406AM-CA Servostar 446M-C

Kollmorgen SEIDEL 01S-M200/13.5-1QP0 Carte

KOLLMORGEN AKD-B02407-NAAN-0000 SERVO DRIVE

Kollmorgen S406M-CA-036

Kollmorgen AKD-P01207-NACN-0054 Servo Driver AKD

Kollmorgen S406BA-CA

MMC Kollmorgen Giddings & Lewis M.1300.6042 Output Module M13006042 R1

Kollmorgen MMC-SD-2.0-230 Servo Drive 100-240VAC 2KW 10A Output 3PH 100-240VAC