AMAT 0190-11817 CP3-SER16-TTL 16-Port Serial Interface Card

AMAT 0190-11817: CP3-SER16-TTL 16-Port Serial Interface Card

The Applied Materials (AMAT) 0190-11817 is a high-density serial communication board developed by SBS Technologies (now part of GE/Abaco) specifically for the AMAT tool ecosystem.

Known as the CP3-SER16-TTL, this module is a 3U CompactPCI (cPCI) card that provides 16 channels of RS-232 serial communication with TTL (Transistor-Transistor Logic) signal levels.

It is a critical link for controlling vacuum gauges, motor drivers, and other peripheral sensors within high-end semiconductor processing platforms.

Related Models

The 0190-11817 is often part of a multi-card cPCI rack where it complements other communication and processing boards:

0190-24633: GE Fanuc / SBS Embedded Systems CPCI Module.

0190-10156: Single-Channel DeviceNet Scanner Card.

0190-05410: Dual Industry Pack (IP) Carrier Module.

0190-34511: Advanced Bus Scanner Interface.

Application Cases

This serial board is a staple in 300mm wafer processing systems such as the AMAT Centura, Endura, and Producer platforms:

Peripheral Sensor Integration: Managing 16 independent data streams from vacuum transducers or gas box controllers.

Robotic Subsystem Control: Interfacing with motion control drivers that require TTL-level serial instructions.

Legacy Tool Upgrades: Used in system controller refreshes where high-density serial connectivity is required within a limited cPCI rack space.

Product Advantages and Features

High Port Density: Provides 16 ports in a single 3U cPCI slot, significantly saving rack space compared to standard 4-port or 8-port cards.

TTL Level Compatibility: Specifically designed for industrial hardware that requires TTL logic, eliminating the need for external level shifters.

Rugged cPCI Design: Built for 24/7 cleanroom operation with high resistance to vibration and mechanical stress.

Deterministic Communication: Provides low-latency serial data paths, which is essential for real-time monitoring and safety interlocks in plasma chambers.

Other Models in the Same Series

The 0190-XXXXX series includes various cPCI and VME-based electronics used by Applied Materials:

0190-11XXX Series: Typically covers specialized serial, network, and safety interface boards.

0190-07XXX Series: Focused on digital I/O and motor control interface cards.

0190-24XXX Series: Generally houses Single Board Computers (SBCs) and core processing units.

Installation and Maintenance

Installation: Power down the cPCI chassis. Carefully align the card with the 3U guide rails and slide it into the backplane. Use the injector/extractor handle to seat the multi-pin connector securely. Tighten the front-panel captive screws.

Software Configuration: Ensure the serial port baud rates and stop bits are configured via the tool’s system software (e.g., VxWorks or Windows-based control).

Maintenance: No periodic calibration is required. Check for loose cable connections at the high-density front-panel connector and ensure the rack's cooling fans are operating to prevent thermal drift in communication timing.

Unique Product Description

The AMAT 0190-11817 is the central "switchboard" for serial data in modern semiconductor tools.

In an environment where dozens of sensors must talk to the main computer simultaneously, this 16-port card acts as the primary translator. By consolidating 16 channels into a compact 3U footprint, it allows AMAT tools to maintain a massive network of sub-components without increasing the size of the electronics cabinet.

It is the gold standard for high-density, TTL-level serial communication in the fab.