Woodward High Output Digital Valve Positioner DVP5000 and DVP10000

High Output Digital Valve Positioner

DVP5000 and DVP10000

Applications

The second-generation Woodward DVP is

the state-of-the-art driver for Woodward

electric actuation. It features a rugged and

compact rack-mount design for use with

various Woodward valves and actuators. It

provides precise positioning based on

multiple input configurations to offer end

users flexibility when connecting to industrial

control systems.

The choice of DVP is dependent on the

valve/actuator chosen for the application.

Please consult Woodward for recommendations.

Description

The High Output DVP is designed to control valves and actuators with brushless DC

(BLDC) motor types. The driver positions based on resolver feedback located on the

valve or actuator. The DVP uses the latest in Woodward control architecture to

provide high-speed precise valve control in challenging applications.

The DVP is designed for plug-and-play installations on many valve types. Woodward

has integrated smart technology into the new generation of valves and actuators

called an ID (identification) module. Upon connection to a valve or actuator equipped

with an ID module, the DVP automatically reads critical product-specific information

to set up the driver. After this auto-detection and customer configuration, the DVP is

ready for use.

The DVP is available in multiple configurations:

Connector or terminal block outputs

90–300 Vdc input voltage

5000 W output power with 90–300 Vdc

10 000 W output power with 200–300 Vdc

EGD (Ethernet), CAN open or Analog (4–20 mA or 0–5 Vdc)

5 discrete inputs and 2 discrete outputs

2 X 24 V, 0.25 A outputs for general purpose use

SIL certified independent shutdown (-s models)

Pre-manufactured cables with connectors are available.

125 Vdc Operation

Description: Digital Valve Positioner (DVP5000 and DVP10000) Models

Power Supply Input: 125 Vdc +20%, –28%

Current Draw DVP5000: 5 A steady state, 40 A peak for 200 ms, 25 A for 30 seconds (during rapid actuator

transient)

(Current draw includes actuator power)

Current Draw DVP10000: 5 A steady state, 40 A for 30 seconds (during rapid actuator transient)

(Current draw includes actuator power)

Output Current: 25 A dc (17.7 A rms) continuous, 40 A peak for 200 ms

Package Heat Dissipation: (With Ethernet Option)

45 W nominal, when the actuator is unpowered.

110 W (preliminary) typical with actuator powered

160 W (preliminary) @ maximum heat load

(Without Ethernet Option)

40 W nominal, when the actuator is unpowered.

105 W (preliminary) Typical with actuator powered

155 W (preliminary) @ maximum heat-load

(This is the heat-load caused by the DVP and occurs when the associated actuator

is driven at full output current.)

Mechanical Dimensions: Rear Panel Mount DVP5000

388 x 308 x 127 mm (H x D x W) (15.26 x 12.125 x 5.0 inches)

Rear Panel Mount DVP10000

388 x 308 x 158 mm (H x D x W) (15.26 x 12.125 x 6.23 inches)

DVP5000 Weight: 7.9 kg (17.4 lb)

DVP10000 Weight: TBD

220 Vdc Operation

Description: Digital Valve Positioner (DVP5000 and DVP10000) Models

Power Supply Input: 220 Vdc +36%, –15%

Current Draw DVP5000: 5 A steady state, 40 A peak for 200 ms, 25 A for 30 seconds (during rapid actuator

transient)

(Current draw includes actuator power)

Current Draw DVP10000: 5 A steady state, 40 A for 30 seconds (during rapid actuator transient)

(Current draw includes actuator power)

Output Current: 25 A dc (17.7 A rms) continuous, 40 A peak for 200 ms

Package Heat Dissipation: (With Ethernet Option)

40 W nominal

160 W (preliminary) @ maximum heat- load

(This is the heat-load caused by the DVP and occurs when the associated actuator

is driven at full output current.)

(Without Ethernet Option)

40 W Nominal

155 W (preliminary) @ maximum heat-load

(This is the heat-load caused by the DVP and occurs when the associated actuator

is driven at full output current.)

Environmental Specifications (Rear Panel Mount)

Ambient Operating

Temperature: –40 to +70 °C (–40 to +158 °F)

Storage Temperature: –40 to +105 °C (–40 to +221 °F)

Humidity: 0 to 100% non-condensing

Mechanical Vibration: Woodward Specification RV5 (0.04 G²/Hz, 10–500 Hz, 2 hours/axis, 1.04 Grms)

Mechanical Shock: Woodward Specification MS2 (30 G, 11 ms half sine pulse)

EMC/EMI: EN 61800-3: EMC Requirements and Test Methods for Adjustable Speed Electrical

Power Drive Systems (Category 3. 2nd Environment);

Woodward Spec: Conducted Low Frequency Immunity, 50 Hz to 10 kHz

Environmental Protection IP20 per IEC 60529. Must be installed in enclosure or cabinet to provide a minimum

IP54 level of protection against dust and moisture when used in Hazardous

Locations.

Regulatory Compliance

European Compliance for CE Marking:

These listings are limited only to those units bearing the CE Marking.

EMC Directive:

Low Voltage Directive:

ATEX – Potentially

Explosive Atmospheres

Directive:

North American Compliance:

2004/108/EC COUNCIL DIRECTIVE of 15 December 2004 on the approximation of

the laws of the Member States relating to electromagnetic compatibility and all

applicable amendments.

Declared to 2006/95/EC COUNCIL DIRECTIVE of 12 December 2006 on the

harmonization of the laws of the Member States relating to electrical equipment

designed for use within certain voltage limits.

Declared to 94/9/EEC COUNCIL DIRECTIVE of 23 March 1994 on the