ABBACS1000 air-cooled

— ACS1000 air-cooled The flexibility you require. The reliability you expect. Document name ACS1000 air-cooled user manual Document owner ABB Switzerland Ltd. Medium voltage AC drives Document number 3BHS213401 E01 Rev H Number of pages 184 Release date 2020-03-18 — new.abb.com/drives/medium-voltage-ac-drives

1.1 Copyright notice The information in this manual is subject to change without notice. This manual and parts thereof must not be reproduced or copied, or disclosed to third parties, nor used for any unauthorized purpose without written permission from ABB Switzerland Ltd., Medium Voltage Drives. The hardware and software described in this manual is provided under a license and may be used, copied, or disclosed only in accordance with the terms of such license. 

1.2 Equipment covered by this manual This manual covers a standard drive and provides generic information on the drive. The manual does not claim to cover all variations and details of the drive, nor to consider all eventualities that may arise during installation, commissioning, operation and maintenance of the drive. If the drive is adapted to specific customer needs or applications, and handling, installation and operation of the drive are affected by these modifications, information on these modifications is provided in the appropriate documentation (eg, layout drawings, wiring diagrams, technical data, engineering notes). If information is required beyond the instructions in this manual, refer the matter to ABB. 

1.3 Structure of the user documentation The complete set of user documentation of a standard drive consists of this manual and supplementary documentation that is provided in the following appendices: - Appendix A - Additional manuals Appendix A provides manuals about additional equipment delivered with the drive (such as project-specific options such as pulse encoder or fieldbus interfaces), or information on modifications of the standard drive. - Appendix B - Technical data Appendix B contains the technical data sheets of the drive. - Appendix C - Mechanical drawings Appendix C provides the outline drawings of the drive. The drawings are generated according to the customer-specific project. - Appendix D - Wiring diagrams • Appendix D contains the circuit diagrams with information on device identification, cross-reference and device identification conventions. The diagrams are generated according to the customer-specific project. • “Setting of protective devices” is generated according to the customer-specific project. - Appendix E - Parts list The parts list is produced for each project and contains all information to identify a component. - Appendix F - Test reports and certificates Appendix F provides the test reports of the drive. Quality certificates, and codes and standards the drive complies with are added if necessary for the project.

- Appendix G - Signal and parameter table The Signal and parameter table includes descriptions of actual signals, control and status words, and control parameters and their default settings.

Terms and abbreviations The following table lists terms and abbreviations you should be familiar with when using this user manual. Some of the terms and abbreviations used in this user manual are unique to ABB and might differ from the normal usage.

Term/Abbreviation Definition

ACS1000A ACS1000 air-cooled drive AMC circuit board Application and Motor Controller The digital signal processor is the heart of the control system of the drive. Cluster A cluster is a synonym for a group of hardware modules of the drive control system. DDCS Distributed drive control system DDCS is an acronym for a serial communication protocol designed for data transfer via optical fibers. Drive Short form for ACS1000 drive Drive system The drive system includes all equipment used to convert electrical into mechanical power to give motion to the machine. DriveBus Communication link dedicated for ABB drives DriveDebug DriveDebug is part of ABB’s DriveWare® software tools for drives using the DDCS communications protocol. DriveDebug runs on computers with Windows® operating systems. DriveDebug is a specialist’s tool used to diagnose, tune and troubleshoot ABB drives. DriveWindow DriveWindow is a DriveWare® product. DriveWindow is a 32 bit Windows® application for commissioning and maintaining ABB drives equipped with optical communication links. Equipment Frequency converter and related equipment EMC Electromagnetic compatibility All measures to suppress electromagnetic disturbances caused by different electrical equipment in the same electromagnetic environment, and to strengthen the immunity of the equipment to such disturbances. Ground Earth To ground The conducting path (eg, conductor) between the electric equipment (eg, frequency converter) and the earth. The electric equipment is connected to the earth, eg, by a grounding set or a grounding switch. INU Inverter unit of the drive. The INU converts the DC voltage to the required AC motor voltage and frequency. IOEC module The IOEC module is an active input and output device for digital and analog signals. Line voltage RMS voltage of the main power supply of the drive MCB Main circuit breaker The MCB is a major protection device of the drive and is the main connection and disconnection point between the main power supply and the drive. Molykote Brand name for lubricants PCB Printed circuit board