Vibro-Meter ® VM600 CPUM and IOCN modular CPU card and input/output card

channel

A

(Alert)

: Yellow LED used to indicate the status of the alarm monitoring (Alert 

or Alert−) for the currently selected measurement channel

D

(Danger)

: Red LED used to indicate the status of the alarm monitoring 

(Danger or Danger−) for the currently selected measurement 

channel

Note: In addition to the LED indicators, a front-panel display is fitted to all versions of the CPUM card.

Connectors

CPUM

• NET : 8P8C (RJ45), female.

Used for the primary Ethernet connection.

• RS232 : DE-9 (9-pin D-sub), female

Used for the primary serial connection.

IOCN

• RS : 6P6C (RJ12/RJ25), female.

Used for the secondary serial connection.

• A : Two 6P6C (RJ12/RJ25), female.

Used for additional serial connections (requires the optional serial 

communications module).

• B : Two 6P6C (RJ12/RJ25), female.

Used for additional serial connections (requires the optional serial 

communications module).

• 1 : 8P8C (RJ45), female.

Can be used for the primary Ethernet connection (instead of the 

CPUM connector (NET)).

• 2 : 8P8C (RJ45), female.

Used for the secondary Ethernet connection.

Physical

CPUM

• Height : 6U (262 mm, 10.3 in)

• Width : 40 mm (1.6 in)

• Depth : 187 mm (7.4 in)

• Weight : 0.40 kg (0.88 lb) approx.

IOCN

• Height : 6U (262 mm, 10.3 in)

• Width : 20 mm (0.8 in)

• Depth : 125 mm (4.9 in)

• Weight : 0.25 kg (0.55 lb) approx.

To order please specify

Type Designation Ordering number (PNR)

CPUM Different versions of the VM600 modular CPU card:

– Ethernet redundant

Modular CPU card with a CPU module that supports two 

Ethernet interfaces and two serial interfaces.

This CPUM supports Ethernet interfaces on the front panel 

(CPUM) and the rear panel (IOCN), a serial interface (RS-232)

on the front panel (CPUM) and a serial interface (isolated

RS-232/RS-485) on the rear panel (IOCN).

200-595-0Ss-33h

(601-003-000-VVV3610-1CC-CCC 

when pre-configured See notes)

– Ethernet redundant varnished

Same as the (standard) Ethernet redundant version, with a 

conformal coating for additional environmental protection.

200-595-0Ss-33hl

(601-003-000-VVV3V610-1CC-CCC 

when pre-configured See notes)

– Serial redundant

Modular CPU card with a CPU module that supports two 

Ethernet interfaces and two serial interfaces, and a serial 

communications module that supports additional serial 

interfaces.

This CPUM supports Ethernet interfaces on the front panel 

(CPUM) and the rear panel (IOCN), a serial interface (RS-232)

on the front panel (CPUM) and a serial interface (isolated

RS-232/RS-485) on the rear panel (IOCN). It also supports two 

additional serial interfaces

(RS-422/RS-485) on the rear panel (IOCN).

200-595-0Ss-53h

(601-003-000-VVV5610-1CC-CCC 

when pre-configured See notes)

IOCN Different versions of the input/output card for the CPUM:

– Ethernet redundant 200-566-000-1Hh

– Ethernet redundant varnished

Same as the (standard) Ethernet redundant version, with a 

conformal coating for additional environmental protection.

200-566-000-1HhL

Notes

Different versions of the CPUM card can be supplied pre-configured with different configurations, as denoted by the 9-digit code in 

the ordering number (610-1CC-CCC).

“1CC-CCC” represents the different configurations that can be used by a finished product. For example, 610-100-000 corresponds 

to the ‘standard’ configuration that is uploaded to a CPUM card (200-595-0Ss-HHh), if no other configuration is specified. For 

information on other configurations. Contact your local Meggitt representative or Meggitt SA for further information.

“Ss” represents the firmware (embedded software) version and “Hh” the hardware version of a card. “S/H” increments for major 

modifications that can affect product interchangeability and “s/h” increments for minor modifications that have no effect on 

interchangeability.

“VVV” represents the different firmware (embedded software) versions and hardware versions that can be used by a 

finished product.

RELATED PRODUCTS

ABE04x VM600 system racks : Refer to corresponding data sheet

CPUR and IOCR VM600 rack controller and communications 

interface card pair

Note: With rack controller redundancy and 

support for Modbus RTU/TCP

: Refer to corresponding data sheet

CPUR2 and IOCR2 VM600 rack controller and communications 

interface card pair

Note: With mathematical processing of 

fieldbus data and support for Modbus TCP 

and PROFIBUS

: Refer to corresponding data sheet

AMC8 and IOC8T VM600 analog monitoring card and

input/output card

: Refer to corresponding data sheet

MPC4 and IOC4T VM600 machinery protection card and

input/output card

: Refer to corresponding data sheets

RLC16 VM600 relay card : Refer to corresponding data sheet

Meggitt (Meggitt PLC) is a leading international engineering company, headquartered in England, that designs and delivers high-performance 

components and subsystems for aerospace, defence and selected energy markets. Meggitt comprises four customer-aligned divisions: 

Airframe Systems, Engine Systems, Energy & Equipment and Services & Support.

The Energy & Equipment division includes the Energy Sensing and Controls product group that specialises in sensing and monitoring solutions for a