MEGGITTVM600Mk2/ VM600 ABE056 slimline rack

ABE056 rack DIP switch is typically set to 03, as this is the default slot 

number used by the VM600 MPSx configuration software for the 

ABE056 rack (VM600 – 1U).

AC-input power supply

Input voltage range : 90 to 264 VAC

Input frequency range : 47 to 63 Hz

Input current : 2.5 A / 115 VAC or 1.5 A / 230 VAC

Output voltages : +5 VDC and ±12 VDC

DC-input power supply

Nominal input (line) voltage : 24 VDC

Input voltage range : 18 to 58 VDC

Input current : 3.0 A / 24 VDC

Output voltages : +5 VDC and ±12 VDC

Power supply check relay

Maximum switching voltage : ±30 VRMS / ±42.4 VAC(PEAK) or 60 VDC

Maximum switching current : 1 A

Environmental

According to IEC 60068-2 recommendations

Temperature

• Operating : 0 to 65°C (32 to 149°F)

• Storage : −40 to 85°C (−40 to 185°F)

Humidity

• Operating : 0 to 90%, non-condensing

• Storage : 0 to 95%, non-condensing

Flammability class : UL 94 HB

Indoor use : Limited to indoor use only

Approvals

Conformity : European Union (EU) declaration of conformity (CE marking).

EAC marking, Eurasian Customs Union (EACU) certificate/

declaration of conformity.

Electromagnetic compatibility : IEC/EN 61000-6-2 and IEC/EN 61000-6-4.

TR CU 020/2011.

Electrical safety : IEC/EN 61010-1.

TR CU 004/2011.

Vibration : IEC 60255-21-1 (Class 2)

Environmental management : RoHS compliant

Russian federal agency for technical 

regulation and metrology (Rosstandart)

: Pattern approval certificate OC.C.28.004.A N° 60224

Physical

Dimensions : See Mechanical drawings on page 5

Weight : 2.5 kg (5.5 lb) approx.

with integrated power supply (RPS1U) and modules (cards)

To order please specify

Type Designation Ordering number (PNR)

ABE056 Different versions of the VM600Mk2 ABE056 slimline rack:

– Version with integrated AC-input power supply VM600SYSMK2/B0/C56S/D5/Hxx

– Version with integrated DC-input power supply VM600SYSMK2/B0/C56S/D2/H00

ABE056 Different versions of the VM600Mk2/VM600 ABE056 slimline rack:

– Version with integrated AC-input power supply VM600SYS/B0/C56S/D5/Hxx

– Version with integrated DC-input power supply VM600SYS/B0/C56S/D2/H00

Notes

Versions of the VM600Mk2 ABE056 slimline rack (PNR VM600SYSMK2/…) and versions of the VM600Mk2/VM600 ABE056 system rack 

(PNR VM600SYS/…) are currently the same, that is, the same artwork/branding/painted finish. However, when ordering a ABE056 

slimline rack with other system components as part of a complete VM600Mk2/ VM600 machinery monitoring system, then the 

appropriate VM600SYS-based ordering number should be used. For example, PNR VM600SYSMK2/… should be used for VM600Mk2

systems containing modules such as the MPC4Mk2 + IOC4Mk2, whereas PNR VM600SYS/… should be used for VM600 systems 

containing cards such as the MPC4/IOC4T. See also Ordering guidelines on page 7.

For the AC-input version of the VM600Mk2/VM600 ABE056 slimline rack (order option code D5), order option code Hxx is used to 

specify a mains power supply lead (power cord) in accordance with the table below.

For the DC-input version of the VM600Mk2/VM600 ABE056 slimline rack (order option code D2), no mains power supply lead (power 

cord) is supplied, so order option code H00 must be used. That is, “None – no mains cable” in accordance with the table below.

Mains power supply lead (power cord) order option codes (Hxx):

Order option 

code Designation

Equivalent 

ordering 

number (PNR)

H00 None – no mains cable ---

H01 No plug – flying lead with wire-end ferrules 957.18.13.0020

HCH J plug as per SEV 1011 (Switzerland) 957.18.13.0021

HEU E+F plug as per CEE7/VII (Europe, Russia, Ukraine) 957.18.13.0022

HUK G plug as per BS 1363 (UK, Hong Kong, Malaysia, Singapore) 957.18.13.0023

HJP B plug as per JIS 8303 (Japan) 957.18.13.0024

HUS B plug as per NEMA 5-15 (United States, Canada) 957.18.13.0025

ORDERING GUIDELINES

The ordering numbers (PNRs) given in Ordering information on page 6 of this data sheet should be used when 

ordering a VM600Mk2/VM600 ABE056 slimline rack as an individual system component for use as a replacement 

or spare part.

However, when ordering this component with other system components as part of a complete

VM600Mk2/VM600 machinery monitoring system, then a VM600SYS-based ordering number should be used. 

Contact your local Meggitt representative for further information.

Meggitt (Meggitt PLC) is a leading international engineering company, headquartered in England, that designs and delivers high-performance 

components and subsystems for aerospace, defence and selected energy markets. Meggitt comprises four customer-aligned divisions: 

Airframe Systems, Engine Systems, Energy & Equipment and Services & Support.

The Energy & Equipment division includes the Energy Sensing and Controls product group that specialises in sensing and monitoring solutions for a 

broad range of energy infrastructure, and control valves for industrial gas turbines, primarily for the Power Generation, Oil & Gas and Services markets. 

Energy & Equipment is headquartered in Switzerland (Meggitt SA) and incorporates the vibro-meter® product line, which has over 65 years of sensor 

and systems expertise and is trusted by original equipment manufacturers (OEMs) globally.