This model is a BACnet BTL-Listed controller at protocol revision 15
(PR15).
Ordering information - accessories
Table 3: Network engines accessories ordering information
Product code number Description
MS-BAT1010-0 Replacement data protection battery for NAE55. Rechargeable gel cell battery:
12 V, 1.2 Ah, with a typical life of 3 to 5 years at 21°C or 70°F
TL-MAP1810-xx A pocket-sized web server that provides a wireless mobile user interface
to Metasys field controllers, thermostats, and smart rooftop units. Refer to
the Mobile Access Portal Gateway Catalog Page (LIT-1900869) to identify the
appropriate product for your region.
Note: The MAP Gateway serves as a replacement for the BTCVT, which is
no longer available but continues to be supported.
MS-EXPORT-0 License enabling Metasys Export Utility software for new installation. Software
may be obtained by electronic download from the Licensing Portal.
AS-XFR100-1 Power transformer, Class 2, 24 VAC, 92 VA maximum output, with enclosure
AS-XFR010-1 Power transformer, Class 2, 24 VAC, 92 VA maximum output, no enclosure
Table 4: Modbus accessories ordering information
Product code number Description
IU-9100-8401 (Europe) RS232-to-RS485 converter, 230 VAC
Order this accessory in AOMS from the European Distribution Center.
IU-9100-8404 (Europe) or
BM485-CIP (North America)
RS232-to-RS485 converter, 24 VAC
For the European market, order this accessory in AOMS from the European
Distribution Center. For the North American market, order this accessory from
duTec at http://www.interfaceconverter.com or 1-800-248-1632, specify vendor
#290904
Table 5: M-Bus accessories ordering information
Product code number Description
SIS-MBUSSCSL-1E M-Bus level converter for up to 6 unit loads, 24V AC/DC, RS-232 connection
SIS-MBUSSCLL-0E M-Bus level converter for up to 100 unit loads, 24V AC/DC, RS-232 connection
SIS-MBUSNCLL-1E M-Bus level converter for up to 100 unit loads; 24 VAC/VDC (IP connection)
SIS-MBUSRPLL-0E M-Bus repeater for up to 100 unit loads, 24V AC/DC
SIS-MBUSRPLH-0E M-Bus repeater for up to 100 unit loads; 230 VAC
INT-DX-KAB01 Optional connection cable SUB-D to RJ-12 for use with SIS-MBUSSCLL-0E
Note: You can order these accessories in AOMS from the European Distribution Center.
Table 6: KNX accessories ordering information
Product code number Description
GRIPIN01-S-KNX KNX IP interface module to connect KNX line through Ethernet to a network
engine
GRRIN01-KNX KNX IP router to connect KNX line through Ethernet to a network engine,
including line or area coupler functionality
Note: Order these accessories in AOMS from the European Distribution Center.
Note: When you use the GRIPIN01-S-KNX for NAE integration, use a non-secure mode. Set Metasys driver N=ROUTING MODE and in ETS set "Secure mode" to deactivated.
Technical specifications
Table 7: NAE5510-2U (UL 864, Smoke Control) technical specifications
Power requirement Dedicated nominal 24 VAC, Class 2 power supply for North America at 50/60
Hz, 20 VAC minimum to 30 VAC maximum
Power consumption 50 VA maximum
Ambient operating
conditions
0°C or 32°F to 50°C or 122°F; 10% to 90% RH, 30°C or 86°F maximum dew point
Ambient storage conditions -40°C or 104°F to 70°C or 158°F; 5% to 95% RH, 30°C or 86°F maximum dew
point
Data protection battery Supports data protection on power failure. Rechargeable gel cell battery: 12 V,
1.2 Ah, with a typical life of 3 to 5 years at 21°C or 70°F; Product Code Number:
MS-BAT1010-0
Clock battery Maintains real-time clock through a power failure. Onboard cell; typical life 10
years at 21°C or 70°F
Processor 1.6 GHz Intel Atom® processor
Table 7: NAE5510-2U (UL 864, Smoke Control) technical specifications
Memory 4 GB flash nonvolatile memory for operating system, configuration data, and
operations data storage and backup.
1 GB SDRAM for operations data dynamic memory for all models
Operating system Metasys system Release 8.1 uses Microsoft Windows Standard 2009
Network and serial
interfaces
• One Ethernet port; 10/100/1000 Mbps; 8-pin RJ-45 connector
• Two optically isolated RS-485 ports; 9.6k, 19.2k, 38.4k, or 76.8k baud;
pluggable and keyed 4-position terminal blocks
• Two RS-232-C serial ports, with standard 9-pin sub-D connectors, that
support all standard baud rates
• Two USB serial ports; standard USB connectors. However, these ports are
not supported on Smoke Control NAEs
Housing Plastic housing with internal metal shield
Plastic material: ABS + polycarbonate
Mounting On a flat surface with screws on four mounting feet or on a dual 35 mm DIN
rail
Dimensions
(Height x Width x Depth)
226 mm x 332 mm x 96.5 mm or 8.9 in. x 13.1 in. x 3.8 in. including mounting
feet
Minimum space for mounting: 303 mm x 408 mm x 148 mm or 12.0 in. x 16.1
in. x 5.8 in.
Shipping weight 2.9 kg or 6.4 lb
Compliance United States: UL Listed, File E107041, CCN PAZX, UL 916, Energy
Management Equipment; FCC Compliant to CFR47, Part 15, Subpart B, Class A
UL Listed, File S4977, UL 864 UUKL/UUKLC 10th Edition Listed, Smoke Control
Units and Accessories for Fire Alarm Systems Equipment
Canada: UL Listed, File E107041, CCN PAZX7, CAN/CSA C22.2 No. 205, Signal
Equipment, Industry Canada Compliant, ICES-003
UL Listed, File S4977, UL 864 UUKL/ORD-C100-13 10th Edition Listed, Smoke