DCS Industrial control system
NameDescriptionContent
NEW CENTER
Current Location:

MotorolaPMC expansion combined with a high-performance VME processor

From:Motorola | Author:LIAO | Time :2025-08-20 | 523 Browse: | 🔊 Click to read aloud ❚❚ | Share:

Read Burst Mode (50ns

EDO):

8-1-1-1 idle; 2-1-1-1 aligned page hit

Write Burst Mode: 4-1-1-1 idle; 3-1-1-1 aligned page hit

Architecture: 128-bit, two-way interleaved

Parity/ECC: No/Yes

L2 CACHE: 256KB

Cache Bus Clock

Frequency:

Processor clock divided by 2

FLASH: On-board programmable

Capacity: 1MB via two 32-pin PLCC/CLCC sockets; 

8MB surface mount

Read Access (8MB

port):

68 clocks (32 byte burst)

Read Access (1MB

port):

260 clocks (8 byte burst)

Write Access

(1MB/8MB):

19 clocks (2 bytes/8 bytes)

NVRAM: 8KB (4KB available for users)

Cell Storage Life: 50 years at 55° C

Cell Capacity Life: 10 years at 100% duty cycle

Removable Battery: Yes

Address/Data: A32/D32/D64

PCI Bus Clock: 33 MHz

Signaling: 5 V

Connector: 114-pin connector located on the planar of 

the MVME2600 between P1 and P2

Controller: Tundra Universe

DTB Master: A16–A32; D08–D64, BLT

DTB Slave: A24–A32; D08–D64, BLT, UAT

Arbiter: RR/PRI

Interrupt

Handler/Generator:

IRQ 1–7/Any one of seven IRQs

System Controller: Yes, jumperable or auto detect

Location Monitor: Two, LMA32

MVME761 MVME712M

Controller: DEC 21140 DEC 21140

Interface

Speed:

10/100Mb/s AUI (10Mb/s)

PCI Local bus

DMA:

Yes, with PCI burst Yes, with PCI burst

Connector: Routed to P2,

RJ-45 on MVME761

Routed to P2,

DB-15 AUI on 

MVME712M

MVME761 MVME712M

Controller: Symbios 53C825A Symbios 53C825A

PCI Local Bus

DMA:

Yes, with PCI local bus 

burst

Yes, with PCI local bus 

burst

Asynchronous: 5.0MB/s 5.0MB/s

Synchronous: 10.0MB/s (8-bit mode), 

20.0MB/s (16-bit mode)

10.0MB/s (8-bit mode), 

20.0MB/s (16-bit mode)

Connector: Routed to P2, 50- or 

68-pin on 

MVME761EXT

Routed to P2, SCSI D-50 

on MVME712M

MVME761 MVME712M

Controller: PC87308 PC87308, 

85230/8536

Number of

Ports:

Two, 16550 compatible Two, 16550 compatible 

and one 85230/8536

Configuration: EIA-574 DTE EIA-232 DCE/DTE

Async Baud

Rate, bps

max.:

38.4K EIA-232, 115Kb/s 

raw

38.4K EIA-232, 115Kb/s 

raw

Connector: Routed to P2, DB-9 on 

MVME761

Routed to P2, DB-25 on 

MVME712M

Synchronous Serial Ports

Parallel Port

Counters/Timers

Floppy

Mouse Interface

Keyboard Interface

IEEE P1386.1 PCI Mezzanine Card Slot

Board Size

Miscellaneous

Reset and abort switches on front panel; six LEDs for FAIL, CHKSTP, 

CPU, PCI, SCON and FUSE

Transition Module I/O Connectors

Board Size

MVME761 MVME712M

Controller: 85230/8536 85230/8536

Number of

Ports:

Two One

Configuration: TTL to P2 (both ports), 

SIM on MVME761

EIA-232 DCE/DTE

Baud Rate, bps

max.:

2.5MB sync, 38.4KB 

async

2.5MB sync, 38.4KB 

async

Oscillator

Clock Rate

(PCLK):

10 MHz/5 MHz 10 MHz/5 MHz

Connector: Routed to P2, HD-26 on 

MVME761

Routed to P2, DB-25 on 

MVME712M

MVME761 MVME712M

Controller: PC87308 PC87308

Configuration: 8-bit bidirectional, full 

IEEE 1284 support; 

Centronics compatible

8-bit bidirectional, IEEE 

1284 minus EPP and 

ECP

Modes: Master only Master only

Connector: Routed to P2, HD-36 on 

MVME761

Routed to P2, D-36 on 

MVME712M

TOD Clock Device: M48T18; 8KB NVRAM

Real-Time

Timers/Counters:

Four, 32-bit programmable

Watchdog Timer: Time-out generates reset

Controller: PC87308

Compatible Controllers: DP8473, 765A, N82077

Configuration: 3.5" 2.88MB and 1.44MB; 5.25" 1.2MB

Connector: HD-50 on front panel

Controller: PC87308

Connector: 6-pin circular female mini DIN on front 

panel

Controller: PC87308

Connector: 6-pin circular female mini DIN on front 

panel

Address/Data: A32/D32/D64, PMC PN1, PN2, PN3, PN4 

connectors

PCI Bus Clock: 33 MHz

Signaling: 5 V

Power: +3.3 V, +5 V, ±12 V; 7.5 watts maximum 

per PMC slot

Module Types: Basic, single-wide, front panel I/O or P2 

I/O (Note: P2 I/O is only accessible to 

systems equipped for VME64 extension 

connectors.)

Height: 233.4 mm (9.2 in.)

Depth: 160.0 mm (6.3 in.)

Front Panel Height: 261.8 mm (10.3 in.)

Width: 19.8 mm (0.8 in.)

Max. Component

Height:

14.8 mm (0.58 in.)

Asynchronous Serial Ports: Two, DB-9 labeled as COM1 and COM2 Three, DB-25 labeled as Serial 1, Serial 2 and Serial 3

Synchronous Serial Ports: Two, HD-26 labeled as Serial 3 and Serial 4 (user 

configurable via installation of SIMs;

two 60-pin connectors on MVME761 planar for 

installation of two SIMs

One, DB-25 labeled as Serial 4

Parallel Port: HD-36, Centronics compatible D-36, Centronics compatible

Ethernet: 10BaseT or 100BaseTX RJ-45 10Mb/s Ethernet;

DB-15 AUI

SCSI: 8- or 16-bit, 50- or 68-pin connector via P2 adapter 8-bit, standard SCSI D-50


  • CTI 2500-ADP2-DISC Discrete Wiring Adapter for Series 500
  • CTI 2500-ADP1 Analog Wiring Adapter for Series 500
  • CTI 2500C-RADP-RS485 Remote Base Controller Adapter for Series 500
  • CTI 2500C-RADP-RBC Profibus RBC Adapter for Series 500
  • CTI 2500C-PADP-120V 120VAC 50W Power Supply for Series 500
  • CTI 2500-RADP RBC Adapter for Series 500
  • CTI 2500-R4500 520/530/DBC Adapter for Series 500 - MATURE
  • CTI 2500-PADP Power Supply Adapter for Series 500
  • CTI 2500-IADP I/O Adapter for Series 500
  • CTI 2500-VP15A-N4-W7 15" Flat-Panel PC with Windows® 7 Embedded
  • CTI 2500S-27-1750 Slice I/O, Ethernet, RS232/485. 900MHz, 2DIO / 4UAI / 2AI
  • CTI 2500S-26-1750 Slice I/O, Ethernet, RS232/485. 900MHz, 8DIO / 2UAI
  • CTI 2500S-23-1750 Slice I/O, Ethernet, RS232/485. 900MHz, 4DI / 4DO / 2UAI / 2AO
  • CTI 2500S-27-1550 Slice I/O, RS232/485. 2DIO / 4UAI / 2AI
  • CTI 2500S-26-1550 Slice I/O, RS232/485. 8DIO / 2UAI
  • CTI 2500S-23-1550 Slice I/O, RS232/485. 4DI / 4DO / 2UAI / 2AO
  • CTI 2500S-27-1050 Slice I/O, Ethernet, 2DIO / 4UAI / 2AI
  • CTI 2500S-26-1050 Slice I/O, Ethernet, 8DIO / 2UAI
  • CTI 2500S-23-1050 Slice I/O, Ethernet, 4DI / 4DO / 2UAI / 2AO
  • CTI 2500C-32F-CJC 32-Pin Field Wiring Connector with Cold Junction Compensation
  • CTI 2500C-32F 32-Pin Field Wiring Connector
  • CTI 2500C-8-TC Eight Thermocouple Inputs
  • CTI 2500C-8-RTD Eight RTD Inputs
  • CTI 2500C-8-RL-FC 8 Form-C Relay Outputs
  • CTI 2500C-8-IDO-24V 8 Isolated 24VDC Outputs
  • CTI 2500C-8-IDO-120V 8 Isolated 120VAC Outputs
  • CTI 2500C-16-DO-24V Sixteen 24VDC Digital Outputs
  • CTI 2500C-16-DO-120V Sixteen 120VAC Digital Outputs
  • CTI 500C-16-IDI-24V Sixteen Isolated 24V AC/DC Digital Inputs
  • CTI 2500C-16-IDI-120V Sixteen Isolated 120V AC/DC Digital Inputs
  • CTI 2500C-16-DIDO-SIM Sixteen Digital Input and Output SImulator
  • CTI 2500C-16-DI-24V Sixteen 24V AC/DC Digital Inputs
  • CTI 2500C-16-DI-120V Sixteen 120V AC/DC Digital Inputs
  • CTI 2500C-RBC-RS485 RS485 Remote Base Controller
  • CTI 2500C-RBC-PRF Profibus Remote Base Controller
  • CTI 2500C-PS-24V-35 35-Watt DC Power Supply
  • CTI 2500C-PS-120V-35 35-Watt AC Power Supply
  • CTI 2500C-R8 Eight-Slot Base
  • CTI 2500C-R4 Four-Slot Base
  • CTI 2500C-R16 Sixteen-Slot Base
  • CTI 2500C-2572-B Fast Ethernet TCP/IP Adapter
  • CTI 2500C-J750 Compact Janus PAC with 3MB Project Memory
  • CTI 2500C-C300 CPU with 512K User Memory
  • CTI 2500C-C200 CPU with 256K User Memory
  • CTI 2500C-C100 CPU with 128K User Memory
  • CTI 2500C-8-AO 8 Analog Outputs
  • CTI 2500C-8-AI 8 Analog Inputs
  • CTI 2559-FCAL Precision Calibration Connector
  • CTI 2559-FPC 40-Position Screw-Terminal Connector
  • CTI 2500-RFC PLC to RF Modem Cable
  • CTI 2500-40F 40-Position Standard Screw-Terminal Connector
  • CTI 2505 Vibration Sensor Interface Module
  • CTI 2554-A 4-Channel Isolated High Speed Counter Module
  • CTI 2553-A 2-Channel Mag Meter Input Module
  • CTI 2502 2-Channel High Speed Counter Input Module
  • CTI 2559-TC 8-Channel Thermocouple Input Module
  • CTI 2556-A 16-Channel Isolated Thermocouple Input Module
  • CTI 2556 16-Channel Isolated Thermocouple Input Module
  • CTI 2551-A 8-Channel Isolated Thermocouple Input Module
  • CTI 2559-RTD 8-Channel RTD Input Module
  • CTI 2557-A 16-Channel RTD Input Module
  • CTI 2557 16-Channel RTD Input Module
  • CTI 2552-A 8-Channel Isolated RTD Input Module
  • CTI 2534 8-Point Form-C Relay Output Module
  • CTI 2532 16-Point Form-A Relay Output Module
  • CTI  2531 32-Point Form-A Relay Output Module
  • CTI  2530 8-Point Form-C Relay Output Module
  • CTI  2562 8-Channel Analog Output Module
  • CTI  2560-A 8-Channel Isolated Analog Output Module
  • CTI  2501 8in/4out Analog Module
  • CTI  2558 8-Channel Analog Input Module
  • CTI  2555-A 16-Channel Analog Input Module
  • CTI  2550-A 8-Channel Isolated Analog Input Module
  • CTI  2599 8/16/32-Point AC Output Module
  • CTI  2598-8 8-Point AC Output Module
  • CTI   2598 8/16-Point AC Output Module
  • CTI   2597 8/16/32-Point DC Output Module
  • CTI 2596-8 8-Point DC Output Module
  • CTI 2596 8/16-Point DC Output Module
  • CTI 2595 16-Point TTL/Word Output Module
  • CTI 2591-EF 16-Point Isolated 11-146 VDC Output with Front Panel Accessible Fuses
  • CTI 2591-A 16-Point Isolated 11-146 VDC Output Module
  • CTI 2590-EF 16-Point Isolated 20-132 VAC Output with Front Panel Accessible Fuses
  • CTI 2590-A 16-Point Isolated Discrete 20-132 VAC Output Module
  • CTI 2589-B 8/16/32-Point Universal Discrete Input Module
  • CTI 2589-A 8/16/32-Point Universal Discrete Input Module
  • CTI 2588-8 8-Point Universal Discrete Input Module
  • CTI 2585 16-Point TTL/Word Input Module
  • CTI 2582 16-Point Isolated 125 VDC Input Module
  • CTI 2581 16-Point Isolated 12-56 VDC Input Module
  • CTI 2580 16-Point Isolated 95-132 VAC Input Module
  • CTI 2500-TAP RS485 Network Tap
  • CTI 2500-RIO-B RS485 Remote Base Controller
  • CTI 2500-RIO-A RS485 Remote Base Controller
  • CTI 2500-RBC Profibus Remote Base Controller
  • CTI 2515-A 100-Watt AC/DC Power Supply with Redundancy Support
  • CTI 2515 100-Watt AC Power Supply (MATURE - replaced by 2515-A)
  • CTI 2513-A 75-Watt DC Power Supply with Redundancy Support
  • CTI 2513 75-Watt 24VDC Power Supply
  • CTI 2512-A 75-Watt AC/DC Power Supply with Redundancy Support
  • CTI 2512 75-Watt AC/DC Power Supply
  • CTI 2510 125 VDC Power Supply
  • CTI 2500-SSB Single Slot Blank Front Panel
  • CTI 2500-R11-A Eleven-Slot Redundant Base
  • CTI 2500P-R16 Sixteen-Slot Base with High-Speed Channel
  • CTI 2500P-R8 Eight-Slot Base with High-Speed Channel
  • CTI 2500P-R4 Four-Slot Base with High-Speed Channel
  • CTI 2541 Redundant Processor Manager Module
  • CTI 2577 Profibus DP Slave Adapter
  • CTI 2573-MOD Serial Interface Adapter with MODBUS
  • CTI 2572-AF Fast Ethernet TCP/IP Adapter with Optical Fiber Connection
  • CTI 2572-A Fast Ethernet TCP/IP Adapter
  • CTI 2572 Ethernet TCP/IP Adapter
  • CTI 2572-B Fast Ethernet TCP/IP Adapter
  • CTI 2576 DeviceNet™ Scanner Module (MATURE)
  • CTI 2500P-ECC1 Ethernet Communications Coprocessor
  • CTI 2500P-JACP Janus Application Coprocessor
  • CTI 2500P-ACP1 Application Coprocessor (MATURE - replaced by 2500P-JACP)
  • CTI 2500P-J450 Janus PAC with 2MB Project Memory
  • CTI 2500-C400 CPU with 3072K User Memory
  • CTI 2500-C300 CPU with 512K User Memory
  • CTI 2500-C200 CPU with 256K User Memory
  • CTI 2500-C100 CPU with 128K User Memory
  • CTI 2500P-J750 Janus PAC with 3MB Project Memory
  • Shinkawa WHF3006M Displacement Converter
  • Shinkawa JBP-220 (P-24-94A / P-24-94B) Circuit Board Module
  • SHINKAWA   WKN-142K5  2-WIRE VIBRATION TRANSDUCER
  • Shinkawa FRP-321 (P-26-54A / P-26-54B) Circuit Board Module