Emerson DeltaV™ Virtual S Series and M Series controller simulation

Emerson DeltaV™ Virtual S Series and M Series controller simulation

Product Description

DeltaV™ virtual S series and M series controllers offer a simple and cost-effective way to develop and test analog controller functions for systems. By using these virtual controllers, configuration and I/O assignment can be thoroughly tested without the need for actual controller hardware. The physical equipment required for setup and maintenance has been reduced. Moreover, it is very easy to add and remove controllers as needed in a virtual environment.

Specification

Operating temperature: -40 to 70 °C (-40 to 158 °F)

Storage temperature: -40 to 85 ° C (-40 to 185 ° F

Relative humidity: 5% to 95%, no condensation

The 10 g½ -sine wave impact lasts for 11 ms

The peak value of vibration 1 mm, from 5 Hz to 16 Hz, and 0.5 g, from 16 Hz to 150 Hz

Operating temperature: -40 to 70 °C (-40 to 158 °F)

Storage temperature: -40 to 85 °C (-40 to 185 °F)

Relative humidity: 5% to 95%, no condensation

The 10 g½ -sine wave impact lasts for 11 ms

The peak value of vibration 1 mm, from 5 Hz to 16 Hz, and 0.5 g, from 16 Hz to 150 Hz

Features

Develop and thoroughly test your control configuration and I/O assignment without controlling hardware or virtual I/O modules (VIMS)

Avoiding control or I/O configuration changes minimizes the possibility of errors

Reduce the risk of unexpected problems arising during debugging or updates

Significantly enhance the efficiency of system setup and decomposition during development and testing